How To Connect To Windows From Mac

Download Article

This wikiHow volition teach you how to connect to your router using a Ethernet (wired) connection too as how to setup your Ethernet settings in Windows and Mac. A wired internet connection is often a lot more secure and reliable than a wireless connection. In guild to connect to your router, y'all will demand an Ethernet cable (besides known as an RJ-45 cablevision, or Cat 5 cable).

1

Connect your modem to the internet cord. Connect the cable, DSL, or Cobweb optic line from the wall to your modem.
two

Connect your modem to the router. If y'all are using a separate wireless router, employ an Ethernet cable to connect from the modem to the internet port on your router. The internet port may be labeled "Internet", "WAN", "UpLink", or "WLAN". A lot of mod modems act as a wireless router. If you are not using an external wireless router, go alee and skip this step.

Advertisement
iii

Bank check to make sure your modem/router is online. Bank check the lights on the front of the modem/router. The lights labeled "Power", "Internet/Online" and "US/DS" calorie-free should be solid. If they are blinking, your modem/router is non connected to the internet. You may demand to contact your service provider for aid.
4

Connect an Ethernet cable to the modem/router. Connect 1 end of the Ethernet cable to the port on the modem/router that is labeled "LAN".
5

Connect the other terminate of the Ethernet cablevision to your computer. You computer should have an Ethernet port on it. On laptops, it'due south normally located on the left side or right side of the keyboard. On towers and all-in-one monitors, the Ethernet port is usually located on the dorsum of the device.

ane

Click the Windows Kickoff menu. It's the icon with the windows logo in the lower-left corner in the chore bar.
2

Click the settings icon. It's icon that resembles a gear, in the left column.
3

Click the "Network & Internet" icon. It's the icon that resembles a globe.
4

Click Ethernet . Information technology's in the column to the left. Information technology should say "Connected" side by side to the Ethernet icon at the top of the page. If it says "Non continued" effort a unlike LAN port on your router, or a different Ethernet cable. If that doesn't piece of work, contact your service provider for assistance.

Advertizement

1

Click . It's in the apple icon in the upper-left corner in the menu bar at the superlative of your screen. This opens the Apple menu on your estimator.
2

Click System Preferences… . It'due south the second option in the Apple card.
3

Click Network . It's the icon that resembles a sphere with white lines arcing all over it.
4

Click Ethernet . It'southward in the box to the left. Information technology should say "connect" and have a green dot next to it. If it doesn't, your Ethernet is not connected. Effort a different LAN port on your Modem, or a different Ethernet cable
5

Click Avant-garde . Information technology's in the lower-right corner of the window.
6

Click TCP/IP . Information technology's the second tap at the top of the Advanced Window.
7

Verify "Configure IPv4 says "Using DHCP". Information technology's but below the tabs at the top. If it doesn't say "Using DHCP" select "Using DHCP" from the drop-downwards menu.
8

Click Renew DHCP Lease . This will ensure that you are able to admission the net while connect via Ethernet.

Enquire a Question

200 characters left

Include your email address to become a bulletin when this question is answered.

Submit

Advertizing

About This Article

Article Summary Ten

i. Connect your cable/DSL/Fiber Optic cablevision to the modem.
2. Connect an Ethernet cable from your modem to the WAN port on your router.
three. Connect an Ethernet cable to the LAN port on your router.
4. Connect the other end of your Ethernet cable to your computer.

Did this summary help you?

Thank you to all authors for creating a page that has been read 86,438 times.